Learn Mastercam / Mastercam classes online

Learn Mastercam Online!

2D, Solids, FBM and also Lathe

Learn Mastercam software online. The course we offer will step the student through learning how to use the design portion CAD. The purpose of this is to design items in either 2D wireframe or in Solids. These features are used to help make a part seem realistic in a virtual world. The wide variety of uses within Mastercam is to draw a simple 2D drawing to a more complex part. Once the student completes the design portion they will learn the CAM portion. Here they will learn how to setup the stock and select tools to machine the part. In Conclusion, the student will earn how to verify the process.

Learn Mastercam has been broken down into several sections 2D Mill, Solids, FBM and Lathe. Starting with the 2D Mill and working through all the different sections will help advance your knowledge in Mastercam.

Learn Mill 2D, Solids will help in building your knowledge base.

Learning this software will start with the Mastercam mill 2D geometry. This course will take the student through the design phase of creating eight 2D parts. Then, go through with setup stock and tool each part, backplot, and verify the part. The next course will be Mastercam Solids . This course takes parts created in 2D course and teaches the student how to turn them into a Solid part.

Learning FBM will help in building your knowledge base.

Learning Mastercam FBM is Feature Based Machining where the student can use features on the solid parts to have Mastercam to tool up the part for them after they setup the FBM properly. The FBM has a drill and mill feature to machine the student part with little effort. The student will be guided through the FBM using several of the Solid parts they created in solids to learn how to setup the FBM to have it tool up their part after you completed the setup.

 

Learning Lathe will help in building your knowledge base.

The Mastercam Lathe course is designed to get the student started to learn how to create several 2D geometry parts. This will take you through the design phase of creating five 2D line drawn parts. Then, it will walk you through on how to stock setup and tool the parts to backplot and then verify. This course also goes into how to setup the mastercam environment to work correctly when they are working on the lathe parts. Mastercam by default is setup for the mill and if not setup properly the student will have problems when they try to machine your part in the wrong environment.

 

Still not sure watch the two videos of parts being machined one mill and one lathe

CNC Machine Center Programming – Watch a part be milled before your own eyes.

Click Here to see a part be milled

CNC Turning Center Programming – Watch a part be turned before your own eyes.

Click Here to see a part be turned